Cart
No products in the cart.
99,99 €
System requirements :
Bring to life the power that changed history with the controller by Lexip x Tsume. The key element of this cult scene takes shape in an ultra-detailed sculpture extending across the entire front of the controller. The ergonomics of the Lexip x Tsume controllers have been recognized as “the best in the industry” by the German Design Awards, easy to use for large and small hands alike, and incorporating additional programmable paddles on the rear. The Lexip x Tsume limited series equips the Pixminds Valiant team, French Valorant champions and world No. 3 on Fortnite. Contents: Controller, Certificate of authenticity, Creators’ word, 1-meter charging cable, 2.4GHz USB receiver key, Documentation
Colors | SASUKE, KAKASHI, MADARA |
---|---|
Platforms | Nintendo Switch, Nintendo Switch OLED, PC |
Connectivity | wireless |
Applications | Gaming |
Licence | Naruto Shippuden |
Manual :
The M1, M2, M3 and M4 paddles on the back of the controller are programmable to perform the same functions as the action buttons.
They can remap a maximum of 14 buttons.
The M1 palette has the default function of button 1
The M2 palette defaults to the function of button 3.
The M3 palette defaults to the function of button 4.
The M4 palette defaults to the function of button 2.
There are 2 pallet setting modes:
A Remapping mode: 1 or more buttons can be set on 1 palette
Mode B Macro: function sequences of several buttons can be set on 1 palette.
MODE A: REMAPPING
Example of operation on M1 pallet
MODE B: MACRO
Example of operation on the M1 pallet
Connect the console to its dock. Plug the receiver into one of the USB ports on the side of the dock. The receiver will flash rapidly in synchro mode.
Switch on the controller using the central button. Keep pressed until the controller goes into synchronization mode. After a few seconds, the LEDs on the controller will remain lit: your controller is connected.
Please note that :
The receiver and controller may occasionally go out of sync. To synchronize them, plug the receiver into your device and insert a thin pin (e.g. an unfolded paper clip) into the small hole on the side: you’ll feel a little “click” and, after a few seconds, the LED will start flashing rapidly.
Switch on the controller using the central button, but only release it when the LED strip is flashing rapidly.
After a few seconds, the LEDs on the controller and receiver stop flashing: they are now synchronized and you can use them as normal.
Sign up and get a coupon for 20% off your first order! *No minimum purchase, not applicable to pre-ordered products.