0 0,00 


No products in the cart.


Plug the webcam’s USB connector into a free USB port on your PC. Then place the webcam at the top of your screen. The lights come on.

[Microphone, adapter, tripod and cable].

Screw the microphone adapter onto the tripod. Place the microphone in the center of the adapter. Connect the cable to the microphone’s XLR port. Then plug the cable’s audio plug into your PC’s jack port.

NOTE: the jack port must be an input port only.

[Kit video]

Unfold the tripods and set them at the desired height. Once the height has been set, tighten the butterfly screws.

Insert a first tube (with hollow ends) into a tripod and secure it with a butterfly screw. Then insert the tube with the “screw” end facing upwards, and secure it with a butterfly screw. Do the same for the second stand.

Assemble the crossbar by joining the 4 tubes. Place the tubes with drilled ends at each end of the bar so that the holes face in the same direction.

Place the crossbar on top of the 2 previously-mounted stand supports, inserting the holes at each end into the screws at the top of each support, and secure with two butterfly screws.

Place the green backdrop over the stand and use the 4 clips to hold it in place.

The storage bag holds tripods, tubes and stand support screws.